There are many bacteria are trap inside the washing machine when cleaning the clothes the soap residue, minerals, and chemicals from your detergent. Originally, these bacteria can clog the inner machine that’s why your water does not get as warm and detergent won’t be as strong. The washing machine is also the hot and humid environment by design so, it can become a breeding ground for bacteria to grow and spread. On the other hand, lingering detergent is also inside traps odor particles thus, the washer may start to harbor stinky smells and if it started to bad enough then this smell starts to come off your dresses.
Below will mention how you can protect your clothing and your family means keeping your washer clean & fresh.
HOW OFTEN TO CLEAN YOUR WASHER
Normally, people used to clean the inside and outside of your washer every month. But you want to use a natural solution then this process is good for your washing machine not harm your septic system so the more- often clean, the better! It is very easy to clean if you have a white washer even though, you’ll notice—dark streaks along the rim especially, those aren’t stains from your clothes that are germs, gross, if you see these streaks it means your washer is not having arrived for a cleaning.
HOW TO CLEAN YOUR WASHER
Are you finding the best way to clean your washer that is eco-friendly and cost-effective? Don’t worry you have come to the right place to know more about to clean your washer. However, everybody knows bleach is often used as a common way to clean a washing machine, it is toxic, smelly, and can clog septic systems. We recommend something natural for your machine and your family. On the other side, white vinegar disinfects and sanitizes, and the acidity helps to eat away built-up residue.
Moreover, as the vinegar drains away and it can clean the insides of pipes, it also has deodorizing properties so that it will get rid of bad odors in the basin and your septic system. As you know, baking soda adds a punch of freshness actually, it can exfoliate away soap residue and neutralize odors. Apart from this, baking soda is white vinegar’s partner in crime.
Now, will go through how to clean a top loader step-by-step-
Cleaning a top-loader
Step 1- Firstly, you need to set your washer to run on the hottest setting for the largest load. you will be running the water without clothes.
Step-2- you need to add 3 cups of white vinegar to the basin start the machine after allowing to fill water. When it going to fills the water will mix with the vinegar.
Step-3- once your machine is going to fully let it agitate for one and two minutes then stop the machine. add in half cup of baking soda again run the machine for 1-2 minutes. Stop the machine.
Step-4- mix the water, white vinegar, and baking soda in the washer basin only for 1-2 hours but don’t have the machine running.
Step-5- start the washing machine 1-2 hours and let the cycle finish and drain the water, completed the first cycle wipe the top of the basin with a sponge. If water doesn’t fill the way of the top so that sum ring underneath the rim needs extra attention. Wipe off with a mixture of water and white vinegar.
Step-6- Run another cycle of plain hot water but don’t add vinegar or baking soda, actually, this will rinse everything out and kill all germs that were loosened in the previous cycle. After all, in the end, wipe the inside of the basin with clean cloth.